After a round of tests the system's ultimate 2.6,
And Redo tests on multimedia, mixers, additives, etc..
I found it necessary to release the first part of the guide will take you forward with confidence.
The reason is simple - things work exactly as I wrote the manual on the subject.
True that there are certain variables between the various systems 2.5 to 2.6.
But they can jump very safely by following the correct processes.
Also The servers of medibuntu back on line (recently downloaded for upgrades)
What makes the process run faster and better.
There are five very orderly process for the user in the process of installing the system on his computer.
1 - Install system (longer then U.E 2.5 ultimate system installation) - please be patience,
Also you will see a process that I still could not figure out the production line Ubuntu system.
Processes terminate at least 100%,
But the Ubuntu family got 168% load,
and then back to 78% during the installation process!
Who said there is nothing new under the sun?
Ubuntu probably has different writers to make there calculation.
2 - At the end of the installation process go to configure current system,
the first thing would be to give your user all privileges to work the system.
Under => System => Administrator => Users and Groups.
Please confirm all the options (if you do not work with Samba, has the potential to skip the Samba-related).
A - Setting Fire Wall.
C - Refresh then Update /Upgrade Synaptic.
D - downloading and installing the new package of Ubuntu Tweak,
And refreshment / loading of Ubuntu Tweak synchronize databases of the software.
The system update / upgrade in the terminal.
3 - after the previous step, update is - ( 133 updated packages on the first stage).
Have to restart your computer for the change kernel to 2.6.32.21.
It is very important not to try to change the process to enter kernel to work properly.
So much in fact we made all the frame work of preparing the system correctly.
Hence actually started work installing the packages, Then configuration of software, etc..
Please remember one thing and maybe most important fundamental in the multimedia work on your station.
The system will cover all the different programs to work "only with 3 mixers working together".
That is, Elsa Mixer, Pulse audio, switch devices (preferably confirm the default mixer per session - Alsa).
And do not forget firefox plug in - MediaPlayerConnectivity , for networking (Audio Video).
And adding Ubuntu Tweak source of flash.
Add course Synaptic java (3 packages) of the system to work properly on the network.
Course to be added to the Restricted Drivers, medibuntu - from 3 Party source of Ubuntu Tweak.
Another option introduction medibuntu our sources databases can be as follows (copy and paste in Terminal +Enter).
Install Mplayer in Ubuntu 10.04 (Lucid) some fix for the codecs on U.E 2.6- from the terminal
- Code: Select all
sudo apt-get update
- Code: Select all
sudo apt-get install mplayer
Now there will be kind of long process to follow and do (kind of scary one) =Do Not worry about it !
First install the mediaplayerconnectivity in FireFox add-ons.
Then to the process that will Update/Upgrade the system codecs from the old codecs to the newer.
I ask you to insert Y in the terminal - After you will see tons of packages to Upgrade there,
And again = No worry about it it will be just fine - Nothing will go wrong with your system!!!
- Code: Select all
sudo wget http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list --output-document=/etc/apt/sources.list.d/medibuntu.list
Then:
- Code: Select all
sudo apt-get -q update
Then:
- Code: Select all
sudo apt-get --yes -q --allow-unauthenticated install medibuntu-keyring
Then:
- Code: Select all
sudo apt-get -q update
For i386 Users - 32 bit:
- Code: Select all
sudo apt-get install w32codecs libdvdcss2
For amd64 Users - 64 bit:
- Code: Select all
sudo apt-get install w64codecs libdvdcss2
In the end of the process - just Update/Upgrade your system,
close the terminal,Restart your machine and you are done with the codecs update.
To get more support with Multimedia on your system/to find the packages you need in Synaptic,
You can use the search in synaptic with this list of words.
gstreamer
mms
asf
plugin
codecs
flac
theora
avi
ffmpeg
mpeg
mpg
compress
convert
konverter
iso
heb
MPlayer
vlc
xmms
xine
mpg123
mpg321
video
audio
stream
ogg
flake
x264
libavcodec-51
vorbis
mp3
mp4
wma
I Have EDIT THE Guide for 2.6.