I have also written a cli based client for finding nas drives on your network:
- Code: Select all
TheeMahn@JackHammer:~$ nasup -s
Nasup 1.7.1-5
=============
GNU nasup home page: <http://www.ultimateedition.info/>.
E-mail bug reports to: <[email protected]>.
Be sure to include the word nasup somewhere in the Subject: field.
Scanning for Goflex IP..
========================
2 NAS Drive(s) detected.
========================
Host exists at 192.168.0.100, attempting mount.
Mount point does not exist, creating /media/NAS/.
Mounting NAS from 192.168.0.100 to /media/NAS/
Username: John
Password:
Host exists at 192.168.0.104, attempting mount.
Mount point does not exist, creating /media/NAS1/.
Mounting NAS from 192.168.0.104 to /media/NAS1/
Username: theemahn
Password:
TheeMahn@JackHammer:~$
Will mount up to 255 NAS drives In this case I am mounting John's (Goliath's) NAS and mine.
Support for multiple monitors has also increased:
- Code: Select all
TheeMahn@JackHammer:~$ multi-monitor
multi-monitor 1.7.1-5
=============
Usage: multi-monitor -<-COMMAND> [option]
possible commands...
-v --version dump version info
-s --scan Scans for monitors
-h --help this help message
Usage Scan;
multi-monitor -s
Detect ports and monitors enabling only monitors
that are conected and set xinerama view.
After completion and successfully finding monitor(s) will provide
command to crontab to set for bootup. See Boot switch.
Usage Boot;
multi-monitor -b
Installs a startup script to engage multi-monitor on boot up.
Useage Help;
multi-monitor -h
Displays this message. For futher information please refer to the manpages.
man multi-monitor
GNU multi-monitor home page: <http://www.ultimateedition.info/>.
E-mail bug reports to: <[email protected]>.
Be sure to include the word multi-monitor somewhere in the Subject: field.
TheeMahn@JackHammer:~$
Have added switches that the help file currently does not contain to allow for booting to xineramma:
- Code: Select all
TheeMahn@JackHammer:~$ multi-monitor -s
TheeMahn's Multi-monitor script. Please report bugs to TheeMahn <[email protected]>
3 Ports detected and 2 Monitors detected. Enabling 2 monitors(s) and setting default resoultion(s).
Port(s) connected:
HDMI-0
DVI-0
Default resolution(s):
1920x1200 60.0*+
1920x1200 60.0*+
Command to be executed: xrandr --output HDMI-0 --auto --output DVI-0 --auto --right-of HDMI-0
If you can read this we were successful. If you would like to make changes permenent please cron this script:
sudo echo "*/1 * * * * TheeMahn DISPLAY=:0.0 /bin/multi-monitor > ~/mm.log 2>&1 >> /etc/crontab"
- Code: Select all
TheeMahn@JackHammer:~$ multi-monitor -b
Command sympnosis: multi-monitor -b <on/off>
TheeMahn@JackHammer:~$
Dual monitors has opened doors for me in the coding department, thanks donors. Let me get the O/S's caught up and I will drop a ton of code to the public. Time is not on my side, never has been. They currently tell me I have to work Saturday, but have Monday off a holy day err holiday A month delay is what I am currently informed on 3dfx, will know more by Sept 17th.