Cell wrote:- Code: Select all
aplay -L
whats the output?Or did we go through this one before?
dr0z@X2-X64-THUNDER:~$ sudo get-edid | parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0xc01b8 "ATI ATOMBIOS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
Identifier "SEC:4244"
VendorName "SEC"
ModelName "SEC:4244"
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "1280x800" # vfreq 60.004Hz, hfreq 48.963kHz
DotClock 68.940000
HTimings 1280 1292 1356 1408
VTimings 800 803 806 816
Flags "-HSync" "-VSync"
EndMode
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
EndSection
dr0z@X2-X64-THUNDER:~$ cat /proc/asound/card0/codec#* | grep Codec
Codec: SigmaTel STAC9205
Codec: LSI ID 1040
dr0z@X2-X64-THUNDER:~$ aplay -L
front:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, STAC92xx Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
pulse
Playback/recording through the PulseAudio sound server
hdmi:CARD=HDMI
HDA ATI HDMI, ATI HDMI
HDMI Audio Output
dr0z@X2-X64-THUNDER:~$
- Code: Select all
speaker-test -Dhw:0,1 -c2 -r48000
dr0z@X2-X64-THUNDER:~$ speaker-test -Dhw:1,3 -c2
speaker-test 1.0.20
Playback device is hw:1,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 1.849928
0 - Front Left
1 - Front Right
Time per period = 1.930954
0 - Front Left
1 - Front Right
Time per period = 1.930908
0 - Front Left
1 - Front Right
Time per period = 1.903762
0 - Front Left
1 - Front Right
Time per period = 1.958139
0 - Front Left
1 - Front Right
Time per period = 1.930988
0 - Front Left
1 - Front Right
Time per period = 1.930921
0 - Front Left
1 - Front Right
Time per period = 1.903895
0 - Front Left
1 - Front Right
Time per period = 1.958082
0 - Front Left
1 - Front Right
Time per period = 1.930708
0 - Front Left
1 - Front Right
you hear anything?
!!!!!!!!!headphones only!!!!!!!!
- Code: Select all
sudo get-edid | parse-edid
will let you see what your system sees about the ed.
dr0z@X2-X64-THUNDER:~$ sudo get-edid | parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0xc01b8 "ATI ATOMBIOS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
Identifier "SEC:4244"
VendorName "SEC"
ModelName "SEC:4244"
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "1280x800" # vfreq 60.004Hz, hfreq 48.963kHz
DotClock 68.940000
HTimings 1280 1292 1356 1408
VTimings 800 803 806 816
Flags "-HSync" "-VSync"
EndMode
# Block type: 2:0 3:f
# Block type: 2:0 3:fe
# Block type: 2:0 3:fe
EndSection
- Code: Select all
cat /proc/asound/card0/codec#* | grep Codec
will tell you what codec your using(chip)
dr0z@X2-X64-THUNDER:~$ cat /proc/asound/card0/codec#* | grep Codec
Codec: SigmaTel STAC9205
Codec: LSI ID 1040
dr0z@X2-X64-THUNDER:~$
Also....you did see the official link that said sound over hdmi isn't supported in karmic...right?A few post up.