something with my system is screwed up not sure what
Posted: Tue Oct 28, 2008 12:29 pmSystem Description:
see hard info.txt
The Problem:
Something has happen to where i cannot get to my desktop.no kernel works and x wont load right
What has been done:
this is what i typed
and this what i got
This was save as a file.
I cannot find anything to fix this and i copied the live cd kernel folder over mine. that did not work.
need help interpreting
Additional Info:
This all happened when i was tweaking with the kernel.i was looking to enhancing it. I dont know what all i did. one thing i recall doing was i typed
I believe if I revert the kernel back to its default that i can fix my system.thus saving hours of time. I just cant find anything to do that from live cd. Live cd works and i am using it to type this.I do not want to reinstall. i am waiting for ultimate edition 2.0 to install on my 320gb hdd.
I have included the one of the .config and my xorg.conf file as well as hardware info to get an understanding of my system.
Comment:
Please help me with my .config file and my issue. I am not sure what to do.
I hope this is all the info required. i cannot open the preload.log file.
see hard info.txt
The Problem:
Something has happen to where i cannot get to my desktop.no kernel works and x wont load right
What has been done:
this is what i typed
- Code: Select all
sudo dmesg
and this what i got
- Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Aug 12 13:37:22 UTC 2008 (Ubuntu 2.6.24-21.40-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfd61000 (usable)
[ 0.000000] BIOS-e820: 00000000cfd61000 - 00000000cfd6e000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfd6e000 - 00000000cfe1f000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe1f000 - 00000000cfee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee9000 - 00000000cfef3000 (usable)
[ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] Warning only 4GB will be used.
[ 0.000000] Use a HIGHMEM64G enabled kernel.
[ 0.000000] 3200MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe200
[ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 1048576
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 6400 pages used for memmap
[ 0.000000] HighMem zone: 812800 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT CFEFD038, 0038 (r1 INTEL DG965WH 697 1000013)
[ 0.000000] ACPI: FACP CFEFC000, 0074 (r1 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: DSDT CFEF7000, 40ED (r1 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: FACS CFEA3000, 0040
[ 0.000000] ACPI: APIC CFEF6000, 0078 (r1 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: WDDT CFEF5000, 0040 (r1 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: MCFG CFEF4000, 003C (r1 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: ASF! CFEF3000, 00A6 (r32 INTEL DG965WH 697 MSFT 1000013)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1798.298 MHz processor.
[ 33.164368] Console: colour VGA+ 80x25
[ 33.164371] console [tty0] enabled
[ 33.164553] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.164817] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.369791] Memory: 3356104k/4194304k available (2177k kernel code, 48656k reserved, 1006k data, 368k init, 2488436k highmem)
[ 33.369797] virtual kernel memory layout:
[ 33.369798] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 33.369799] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 33.369800] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 33.369801] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 33.369802] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 33.369803] .data : 0xc0320504 - 0xc041bdc4 (1006 kB)
[ 33.369804] .text : 0xc0100000 - 0xc0320504 (2177 kB)
[ 33.369807] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 33.369842] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 33.449803] Calibrating delay using timer specific routine.. 3599.53 BogoMIPS (lpj=7199062)
[ 33.449825] Security Framework initialized
[ 33.449831] SELinux: Disabled at boot.
[ 33.449842] AppArmor: AppArmor initialized
[ 33.449846] Failure registering capabilities with primary security module.
[ 33.449852] Mount-cache hash table entries: 512
[ 33.449961] Initializing cgroup subsys ns
[ 33.449965] Initializing cgroup subsys cpuacct
[ 33.449975] CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001 00000000
[ 33.449982] monitor/mwait feature present.
[ 33.449983] using mwait in idle threads.
[ 33.449987] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 33.449989] CPU: L2 cache: 512K
[ 33.449992] CPU: After all inits, caps: afebfbff 20100000 00000000 00043940 0000e31d 00000000 00000001 00000000
[ 33.450000] Compat vDSO mapped to ffffe000.
[ 33.450011] Checking 'hlt' instruction... OK.
[ 33.466257] SMP alternatives: switching to UP code
[ 33.467748] Freeing SMP alternatives: 11k freed
[ 33.467842] Early unpacking initramfs... done
[ 33.912972] ACPI: Core revision 20070126
[ 33.913011] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 33.915715] CPU0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz stepping 01
[ 33.915731] Total of 1 processors activated (3599.53 BogoMIPS).
[ 33.915872] ENABLING IO-APIC IRQs
[ 33.916034] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 34.061391] Brought up 1 CPUs
[ 34.061411] CPU0 attaching sched-domain:
[ 34.061413] domain 0: span 01
[ 34.061415] groups: 01
[ 34.061557] net_namespace: 64 bytes
[ 34.061571] Booting paravirtualized kernel on bare hardware
[ 34.061985] Time: 13:36:03 Date: 10/28/08
[ 34.062007] NET: Registered protocol family 16
[ 34.062197] EISA bus registered
[ 34.062219] ACPI: bus type pci registered
[ 34.063793] PCI: Using configuration type 1
[ 34.063820] Setting up standard PCI resources
[ 34.071184] ACPI: EC: Look up EC in DSDT
[ 34.072611] ACPI: Interpreter enabled
[ 34.072615] ACPI: (supports S0 S3 S4 S5)
[ 34.072625] ACPI: Using IOAPIC for interrupt routing
[ 34.076499] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.077298] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 34.077302] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 34.078493] PCI: Transparent bridge - 0000:00:1e.0
[ 34.078532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.078863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 34.079101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 34.079197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 34.079293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 34.079388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 34.079484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 34.084084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.084173] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 34.084258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.084341] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.084424] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 34.084507] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 34.084589] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 34.084672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.084803] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.084836] pnp: PnP ACPI init
[ 34.084844] ACPI: bus type pnp registered
[ 34.087421] pnp: PnP ACPI: found 12 devices
[ 34.087424] ACPI: ACPI bus type pnp unregistered
[ 34.087428] PnPBIOS: Disabled by ACPI PNP
[ 34.087645] PCI: Using ACPI for IRQ routing
[ 34.087647] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 34.097459] NET: Registered protocol family 8
[ 34.097462] NET: Registered protocol family 20
[ 34.097541] AppArmor: AppArmor Filesystem Enabled
[ 34.101459] Time: tsc clocksource has been installed.
[ 34.109590] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 34.109594] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 34.109598] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 34.109601] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 34.109605] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 34.109608] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 34.109612] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 34.109616] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 34.109620] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 34.109623] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 34.109634] system 00:06: ioport range 0x500-0x53f has been reserved
[ 34.109638] system 00:06: ioport range 0x400-0x47f has been reserved
[ 34.109641] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 34.140105] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[ 34.140108] PCI: Bridge: 0000:00:01.0
[ 34.140110] IO window: 3000-3fff
[ 34.140113] MEM window: e0000000-e2ffffff
[ 34.140116] PREFETCH window: d0000000-dfffffff
[ 34.140119] PCI: Bridge: 0000:00:1c.0
[ 34.140120] IO window: disabled.
[ 34.140124] MEM window: disabled.
[ 34.140127] PREFETCH window: disabled.
[ 34.140131] PCI: Bridge: 0000:00:1c.1
[ 34.140133] IO window: 2000-2fff
[ 34.140137] MEM window: e3100000-e31fffff
[ 34.140140] PREFETCH window: disabled.
[ 34.140144] PCI: Bridge: 0000:00:1c.2
[ 34.140145] IO window: disabled.
[ 34.140149] MEM window: disabled.
[ 34.140152] PREFETCH window: disabled.
[ 34.140156] PCI: Bridge: 0000:00:1c.3
[ 34.140157] IO window: disabled.
[ 34.140161] MEM window: disabled.
[ 34.140163] PREFETCH window: disabled.
[ 34.140167] PCI: Bridge: 0000:00:1c.4
[ 34.140168] IO window: disabled.
[ 34.140172] MEM window: disabled.
[ 34.140175] PREFETCH window: disabled.
[ 34.140181] PCI: Bridge: 0000:00:1e.0
[ 34.140183] IO window: 1000-1fff
[ 34.140187] MEM window: e3000000-e30fffff
[ 34.140190] PREFETCH window: disabled.
[ 34.140208] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.140212] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.140229] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.140233] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 34.140249] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 34.140253] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 34.140268] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 34.140273] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 34.140288] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 34.140293] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 34.140308] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.140312] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 34.140321] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 34.140332] NET: Registered protocol family 2
[ 34.177779] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 34.178054] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 34.178552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 34.178800] TCP: Hash tables configured (established 131072 bind 65536)
[ 34.178803] TCP reno registered
[ 34.189931] checking if image is initramfs... it is
[ 34.641431] Switched to high resolution mode on CPU 0
[ 35.059246] Freeing initrd memory: 10901k freed
[ 35.059829] audit: initializing netlink socket (disabled)
[ 35.059839] audit(1225200963.584:1): initialized
[ 35.060036] highmem bounce pool size: 64 pages
[ 35.061853] VFS: Disk quotas dquot_6.5.1
[ 35.061932] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 35.062059] io scheduler noop registered
[ 35.062061] io scheduler anticipatory registered
[ 35.062063] io scheduler deadline registered
[ 35.062075] io scheduler cfq registered (default)
[ 35.062384] Boot video device is 0000:01:00.0
[ 35.062560] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 35.062593] assign_interrupt_mode Found MSI capability
[ 35.062619] Allocate Port Service[0000:00:01.0:pcie00]
[ 35.062696] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 35.062733] assign_interrupt_mode Found MSI capability
[ 35.062763] Allocate Port Service[0000:00:1c.0:pcie00]
[ 35.062798] Allocate Port Service[0000:00:1c.0:pcie02]
[ 35.062876] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 35.062913] assign_interrupt_mode Found MSI capability
[ 35.062943] Allocate Port Service[0000:00:1c.1:pcie00]
[ 35.062981] Allocate Port Service[0000:00:1c.1:pcie02]
[ 35.063067] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 35.063104] assign_interrupt_mode Found MSI capability
[ 35.063134] Allocate Port Service[0000:00:1c.2:pcie00]
[ 35.063168] Allocate Port Service[0000:00:1c.2:pcie02]
[ 35.063244] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 35.063281] assign_interrupt_mode Found MSI capability
[ 35.063311] Allocate Port Service[0000:00:1c.3:pcie00]
[ 35.063345] Allocate Port Service[0000:00:1c.3:pcie02]
[ 35.063423] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 35.063460] assign_interrupt_mode Found MSI capability
[ 35.063490] Allocate Port Service[0000:00:1c.4:pcie00]
[ 35.063525] Allocate Port Service[0000:00:1c.4:pcie02]
[ 35.063760] isapnp: Scanning for PnP cards...
[ 35.416726] isapnp: No Plug & Play device found
[ 35.450481] Real Time Clock Driver v1.12ac
[ 35.450568] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.450686] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.451471] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.452204] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.452269] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 35.452375] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 35.455282] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.455285] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.460554] mice: PS/2 mouse device common for all mice
[ 35.460710] EISA: Probing bus 0 at eisa.0
[ 35.460715] Cannot allocate resource for EISA slot 1
[ 35.460717] Cannot allocate resource for EISA slot 2
[ 35.460719] Cannot allocate resource for EISA slot 3
[ 35.460720] Cannot allocate resource for EISA slot 4
[ 35.460733] EISA: Detected 0 cards.
[ 35.460735] cpuidle: using governor ladder
[ 35.460737] cpuidle: using governor menu
[ 35.460807] NET: Registered protocol family 1
[ 35.460830] Using IPI No-Shortcut mode
[ 35.460855] registered taskstats version 1
[ 35.460978] Magic number: 12:89:636
[ 35.461004] hash matches device ptycf
[ 35.461029] hash matches device 0000:00:1c.1:pcie02
[ 35.461044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 35.461045] EDD information not available.
[ 35.461153] Freeing unused kernel memory: 368k freed
[ 35.488350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 36.720604] fuse init (API version 7.9)
[ 36.743150] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 36.743162] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.743171] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.743181] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 37.307056] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 37.307059] Copyright (c) 1999-2006 Intel Corporation.
[ 37.307105] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 37.307116] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 37.307807] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:c0:05:a0:14
[ 37.342906] usbcore: registered new interface driver usbfs
[ 37.342927] usbcore: registered new interface driver hub
[ 37.379421] usbcore: registered new device driver usb
[ 37.387748] USB Universal Host Controller Interface driver v3.0
[ 37.396966] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 37.396990] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.397000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 37.397003] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 37.397179] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 37.397208] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040a0
[ 37.397328] usb usb1: configuration #1 chosen from 1 choice
[ 37.397349] hub 1-0:1.0: USB hub found
[ 37.397353] hub 1-0:1.0: 2 ports detected
[ 37.434990] SCSI subsystem initialized
[ 37.467312] libata version 3.00 loaded.
[ 37.498808] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 37.498818] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 37.498822] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 37.498844] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 37.498870] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00004080
[ 37.498968] usb usb2: configuration #1 chosen from 1 choice
[ 37.498989] hub 2-0:1.0: USB hub found
[ 37.498994] hub 2-0:1.0: 2 ports detected
[ 37.606014] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 37.606024] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.606028] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.606051] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 37.606077] uhci_hcd 0000:00:1d.0: irq 22, io base 0x00004060
[ 37.606178] usb usb3: configuration #1 chosen from 1 choice
[ 37.606198] hub 3-0:1.0: USB hub found
[ 37.606202] hub 3-0:1.0: 2 ports detected
[ 37.706645] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 37.706655] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.706659] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.706681] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 37.706708] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040
[ 37.706819] usb usb4: configuration #1 chosen from 1 choice
[ 37.706841] hub 4-0:1.0: USB hub found
[ 37.706845] hub 4-0:1.0: 2 ports detected
[ 37.810553] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 37.810563] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.810567] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.810589] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 37.810615] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020
[ 37.810716] usb usb5: configuration #1 chosen from 1 choice
[ 37.810737] hub 5-0:1.0: USB hub found
[ 37.810742] hub 5-0:1.0: 2 ports detected
[ 37.914483] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 37.914494] uhci_hcd 0000:07:00.0: UHCI Host Controller
[ 37.914516] uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 37.914539] uhci_hcd 0000:07:00.0: irq 21, io base 0x00001460
[ 37.914642] usb usb6: configuration #1 chosen from 1 choice
[ 37.914664] hub 6-0:1.0: USB hub found
[ 37.914669] hub 6-0:1.0: 2 ports detected
[ 37.914712] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 37.914723] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 37.914726] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 38.018419] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 23
[ 38.018430] uhci_hcd 0000:07:00.1: UHCI Host Controller
[ 38.018454] uhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7
[ 38.018480] uhci_hcd 0000:07:00.1: irq 23, io base 0x00001440
[ 38.018584] usb usb7: configuration #1 chosen from 1 choice
[ 38.018607] hub 7-0:1.0: USB hub found
[ 38.018611] hub 7-0:1.0: 2 ports detected
[ 38.122332] ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 38.122343] uhci_hcd 0000:07:01.0: UHCI Host Controller
[ 38.122366] uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 8
[ 38.122389] uhci_hcd 0000:07:01.0: irq 23, io base 0x00001420
[ 38.122486] usb usb8: configuration #1 chosen from 1 choice
[ 38.122507] hub 8-0:1.0: USB hub found
[ 38.122512] hub 8-0:1.0: 2 ports detected
[ 38.226250] ACPI: PCI Interrupt 0000:07:01.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 38.226261] uhci_hcd 0000:07:01.1: UHCI Host Controller
[ 38.226283] uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 9
[ 38.226307] uhci_hcd 0000:07:01.1: irq 21, io base 0x00001400
[ 38.226405] usb usb9: configuration #1 chosen from 1 choice
[ 38.226427] hub 9-0:1.0: USB hub found
[ 38.226431] hub 9-0:1.0: 2 ports detected
[ 38.330297] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 10
[ 38.334193] ehci_hcd 0000:00:1a.7: debug port 1
[ 38.334199] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 38.334204] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe3225400
[ 38.350036] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.350156] usb usb10: configuration #1 chosen from 1 choice
[ 38.350179] hub 10-0:1.0: USB hub found
[ 38.350185] hub 10-0:1.0: 4 ports detected
[ 38.454038] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
[ 38.454052] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 38.454055] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 38.454081] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 11
[ 38.457994] ehci_hcd 0000:00:1d.7: debug port 1
[ 38.458000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 38.458006] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xe3225000
[ 38.469937] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.470048] usb usb11: configuration #1 chosen from 1 choice
[ 38.470071] hub 11-0:1.0: USB hub found
[ 38.470076] hub 11-0:1.0: 6 ports detected
[ 38.573977] ACPI: PCI Interrupt 0000:07:00.2[C] -> GSI 23 (level, low) -> IRQ 22
[ 38.573994] ehci_hcd 0000:07:00.2: EHCI Host Controller
[ 38.574028] ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 12
[ 38.574066] ehci_hcd 0000:07:00.2: irq 22, io mem 0xe3004900
[ 38.585856] ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.586002] usb usb12: configuration #1 chosen from 1 choice
[ 38.586036] hub 12-0:1.0: USB hub found
[ 38.586043] hub 12-0:1.0: 4 ports detected
[ 38.689876] ACPI: PCI Interrupt 0000:07:01.2[C] -> GSI 20 (level, low) -> IRQ 20
[ 38.689891] ehci_hcd 0000:07:01.2: EHCI Host Controller
[ 38.689924] ehci_hcd 0000:07:01.2: new USB bus registered, assigned bus number 13
[ 38.689966] ehci_hcd 0000:07:01.2: irq 20, io mem 0xe3004800
[ 38.701763] ehci_hcd 0000:07:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.701906] usb usb13: configuration #1 chosen from 1 choice
[ 38.701940] hub 13-0:1.0: USB hub found
[ 38.701947] hub 13-0:1.0: 4 ports detected
[ 38.809410] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 38.859122] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e3004000-e30047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 38.863400] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.863428] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 38.864137] scsi0 : pata_marvell
[ 38.864715] scsi1 : pata_marvell
[ 38.864755] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
[ 38.864758] ata2: DUMMY
[ 38.864783] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 39.361598] ata1.00: ATAPI: ATAPI CD R DH52R2P, DP51, max UDMA/33
[ 39.361626] ata1.01: ATAPI: HL-DT-ST RW/DVD GCC-4481B, E106, max UDMA/33
[ 39.449150] usb 10-2: new high speed USB device using ehci_hcd and address 2
[ 39.549475] ata1.00: configured for UDMA/33
[ 39.583623] usb 10-2: configuration #1 chosen from 1 choice
[ 39.597882] usbcore: registered new interface driver libusual
[ 39.603127] Initializing USB Mass Storage driver...
[ 39.604103] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.604785] usbcore: registered new interface driver usb-storage
[ 39.604789] USB Mass Storage support registered.
[ 39.604867] usb-storage: device found at 2
[ 39.604869] usb-storage: waiting for device to settle before scanning
[ 39.721325] ata1.01: configured for UDMA/33
[ 39.722352] scsi 0:0:0:0: CD-ROM ATAPI CD R DH52R2P DP51 PQ: 0 ANSI: 5
[ 39.722966] scsi 0:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B E106 PQ: 0 ANSI: 5
[ 39.724863] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 39.724890] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.724902] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 39.724932] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
[ 39.724951] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.724960] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 39.728845] ata_piix 0000:00:1f.2: version 2.12
[ 39.728851] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 39.728870] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 39.728897] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.731599] scsi3 : ata_piix
[ 39.732046] scsi4 : ata_piix
[ 39.732148] ata3: SATA max UDMA/133 cmd 0x4438 ctl 0x444c bmdma 0x4410 irq 19
[ 39.732150] ata4: SATA max UDMA/133 cmd 0x4430 ctl 0x4448 bmdma 0x4418 irq 19
[ 39.740344] Driver 'sr' needs updating - please use bus_type methods
[ 39.747994] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 39.748000] Uniform CD-ROM driver Revision: 3.20
[ 39.748063] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 39.748923] sr1: scsi3-mmc drive: 0x/0x writer cd/rw xa/form2 cdda tray
[ 39.748991] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 39.756212] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 39.756231] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 39.914720] ata3.00: ATA-7: WDC WD1600JS-00SGB0, 20.06C03, max UDMA/133
[ 39.914727] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.929935] ata3.00: configured for UDMA/133
[ 40.102161] ata4.00: ATA-7: ST980811AS, 3.ALC, max UDMA/133
[ 40.102166] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 40.102356] ata4.01: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
[ 40.102361] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 40.118816] ata4.00: configured for UDMA/133
[ 40.132725] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001edede0]
[ 40.133687] ata4.01: configured for UDMA/133
[ 40.133792] scsi 3:0:0:0: Direct-Access ATA WDC WD1600JS-00S 20.0 PQ: 0 ANSI: 5
[ 40.133859] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 40.133943] scsi 4:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5
[ 40.133999] scsi 4:0:0:0: Attached scsi generic sg3 type 0
[ 40.134067] scsi 4:0:1:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[ 40.134121] scsi 4:0:1:0: Attached scsi generic sg4 type 0
[ 40.134139] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 40.134157] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
[ 40.134186] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 40.134776] scsi5 : ata_piix
[ 40.135941] scsi6 : ata_piix
[ 40.136017] ata5: SATA max UDMA/133 cmd 0x4428 ctl 0x4444 bmdma 0x40f0 irq 19
[ 40.136020] ata6: SATA max UDMA/133 cmd 0x4420 ctl 0x4440 bmdma 0x40f8 irq 19
[ 40.472942] ata6.00: ATA-7: WDC WD800AAJS-00PSA0, 05.06H05, max UDMA/133
[ 40.472948] ata6.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 40.488692] ata6.00: configured for UDMA/133
[ 40.488831] scsi 6:0:0:0: Direct-Access ATA WDC WD800AAJS-00 05.0 PQ: 0 ANSI: 5
[ 40.488926] scsi 6:0:0:0: Attached scsi generic sg5 type 0
[ 40.498247] Driver 'sd' needs updating - please use bus_type methods
[ 40.498322] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 40.498333] sd 3:0:0:0: [sda] Write Protect is off
[ 40.498335] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.498350] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.498390] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 40.498399] sd 3:0:0:0: [sda] Write Protect is off
[ 40.498401] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.498415] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.498419] sda: sda1 sda2 < sda5 >
[ 40.525844] sd 3:0:0:0: [sda] Attached SCSI disk
[ 40.526513] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.526525] sd 4:0:0:0: [sdb] Write Protect is off
[ 40.526527] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.526542] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.526587] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.526596] sd 4:0:0:0: [sdb] Write Protect is off
[ 40.526598] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.526612] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.526616] sdb: sdb1
[ 40.677374] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 40.677885] sd 4:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 40.677896] sd 4:0:1:0: [sdc] Write Protect is off
[ 40.677899] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 40.677914] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.677958] sd 4:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 40.677966] sd 4:0:1:0: [sdc] Write Protect is off
[ 40.677968] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 40.677982] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.677986] sdc: sdc1
[ 40.684819] sd 4:0:1:0: [sdc] Attached SCSI disk
[ 40.685345] sd 6:0:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
[ 40.685356] sd 6:0:0:0: [sdd] Write Protect is off
[ 40.685358] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 40.685373] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.685415] sd 6:0:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
[ 40.685424] sd 6:0:0:0: [sdd] Write Protect is off
[ 40.685426] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 40.685440] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.685443] sdd: sdd1
[ 40.689363] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 44.597116] usb-storage: device scan complete
[ 44.597741] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 44.598247] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 44.598747] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 44.599246] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 44.603281] sd 2:0:0:0: [sde] Attached SCSI removable disk
[ 44.603318] sd 2:0:0:0: Attached scsi generic sg6 type 0
[ 44.604399] sd 2:0:0:1: [sdf] Attached SCSI removable disk
[ 44.604435] sd 2:0:0:1: Attached scsi generic sg7 type 0
[ 44.605531] sd 2:0:0:2: [sdg] Attached SCSI removable disk
[ 44.605568] sd 2:0:0:2: Attached scsi generic sg8 type 0
[ 44.607275] sd 2:0:0:3: [sdh] Attached SCSI removable disk
[ 44.607311] sd 2:0:0:3: Attached scsi generic sg9 type 0
[ 45.540988] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 45.577319] ISO 9660 Extensions: RRIP_1991A
[ 45.765773] Registering unionfs 1.4
[ 45.765777] unionfs: debugging is not enabled
[ 45.775844] loop: module loaded
[ 45.839473] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 77.102761] usb 12-4: new high speed USB device using ehci_hcd and address 2
[ 77.214645] usb 12-4: device descriptor read/64, error -71
[ 77.430468] usb 12-4: device descriptor read/64, error -71
[ 77.646308] usb 12-4: new high speed USB device using ehci_hcd and address 3
[ 77.758205] usb 12-4: device descriptor read/64, error -71
[ 77.974043] usb 12-4: device descriptor read/64, error -71
[ 78.189870] usb 12-4: new high speed USB device using ehci_hcd and address 4
[ 78.597518] usb 12-4: device not accepting address 4, error -71
[ 78.709436] usb 12-4: new high speed USB device using ehci_hcd and address 5
[ 79.117109] usb 12-4: device not accepting address 5, error -71
[ 83.377663] usb 10-1: new high speed USB device using ehci_hcd and address 3
[ 83.514707] usb 10-1: configuration #1 chosen from 1 choice
[ 83.521539] scsi7 : SCSI emulation for USB Mass Storage devices
[ 83.527154] usb-storage: device found at 3
[ 83.527156] usb-storage: waiting for device to settle before scanning
[ 88.521955] usb-storage: device scan complete
[ 88.522963] scsi 7:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS
[ 88.527565] sd 7:0:0:0: [sdi] 31719424 512-byte hardware sectors (16240 MB)
[ 88.528309] sd 7:0:0:0: [sdi] Write Protect is off
[ 88.528312] sd 7:0:0:0: [sdi] Mode Sense: 43 00 00 00
[ 88.528314] sd 7:0:0:0: [sdi] Assuming drive cache: write through
[ 88.531683] sd 7:0:0:0: [sdi] 31719424 512-byte hardware sectors (16240 MB)
[ 88.532430] sd 7:0:0:0: [sdi] Write Protect is off
[ 88.532433] sd 7:0:0:0: [sdi] Mode Sense: 43 00 00 00
[ 88.532435] sd 7:0:0:0: [sdi] Assuming drive cache: write through
[ 88.532439] sdi: sdi1
[ 88.599732] sd 7:0:0:0: [sdi] Attached SCSI removable disk
[ 88.599792] sd 7:0:0:0: Attached scsi generic sg10 type 0
[ 96.203841] Linux agpgart interface v0.102
[ 96.269334] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[ 96.269337] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[ 96.269720] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 96.269726] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 96.269882] heci: link layer has been established.
[ 96.371537] heci: heci driver initialization successful.
[ 96.643503] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 96.690971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 97.038716] input: Power Button (FF) as /devices/virtual/input/input2
[ 97.050621] ACPI: Power Button (FF) [PWRF]
[ 97.050694] input: Sleep Button (CM) as /devices/virtual/input/input3
[ 97.058644] ACPI: Sleep Button (CM) [SLPB]
[ 98.542481] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 98.542502] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 100.240046] iTCO_vendor_support: vendor-support=0
[ 100.383951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 100.384027] iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
[ 100.384058] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 100.515899] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 101.071433] parport_pc 00:07: reported by Plug and Play ACPI
[ 101.071511] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 101.181411] ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 102.372996] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 104.689528] device-mapper: uevent: version 1.0.3
[ 104.689553] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
[ 105.794216] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1 across:6385796k
[ 106.218680] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 108.733706] No dock devices found.
[ 113.587613] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 113.587618] apm: overridden by ACPI.
[ 114.520542] lp0: using parport0 (interrupt-driven).
[ 114.561811] ppdev: user-space parallel port driver
[ 116.614820] usb 11-6: new high speed USB device using ehci_hcd and address 2
[ 116.747682] usb 11-6: configuration #1 chosen from 1 choice
[ 116.751159] scsi8 : SCSI emulation for USB Mass Storage devices
[ 116.752956] usb-storage: device found at 2
[ 116.752960] usb-storage: waiting for device to settle before scanning
[ 121.754642] usb-storage: device scan complete
[ 121.755193] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
[ 121.755938] scsi 8:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0
[ 121.766911] sd 8:0:0:0: [sdj] 7856127 512-byte hardware sectors (4022 MB)
[ 121.767537] sd 8:0:0:0: [sdj] Write Protect is off
[ 121.767541] sd 8:0:0:0: [sdj] Mode Sense: 45 00 00 08
[ 121.767543] sd 8:0:0:0: [sdj] Assuming drive cache: write through
[ 121.769655] sd 8:0:0:0: [sdj] 7856127 512-byte hardware sectors (4022 MB)
[ 121.770284] sd 8:0:0:0: [sdj] Write Protect is off
[ 121.770288] sd 8:0:0:0: [sdj] Mode Sense: 45 00 00 08
[ 121.770290] sd 8:0:0:0: [sdj] Assuming drive cache: write through
[ 121.770295] sdj: sdj1
[ 121.771323] sd 8:0:0:0: [sdj] Attached SCSI removable disk
[ 121.771366] sd 8:0:0:0: Attached scsi generic sg11 type 0
[ 121.778524] sr2: scsi3-mmc drive: 48x/48x tray
[ 121.778577] sr 8:0:0:1: Attached scsi CD-ROM sr2
[ 121.778627] sr 8:0:0:1: Attached scsi generic sg12 type 5
[ 125.172278] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 125.172284] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 125.798207] Bluetooth: Core ver 2.11
[ 125.798745] NET: Registered protocol family 31
[ 125.798749] Bluetooth: HCI device and connection manager initialized
[ 125.798752] Bluetooth: HCI socket layer initialized
[ 125.855061] Bluetooth: L2CAP ver 2.9
[ 125.855065] Bluetooth: L2CAP socket layer initialized
[ 126.980712] Bluetooth: RFCOMM socket layer initialized
[ 126.980725] Bluetooth: RFCOMM TTY layer initialized
[ 126.980726] Bluetooth: RFCOMM ver 1.8
[ 128.146778] NET: Registered protocol family 17
[ 130.591675] NET: Registered protocol family 10
[ 130.592043] lo: Disabled Privacy Extensions
[ 140.771300] eth0: no IPv6 routers present
[ 286.746064] FAT: Filesystem panic (dev sdj1)
[ 286.746071] invalid access to FAT (entry 0xd997ffd5)
[ 286.746073] File system has been set read-only
[ 286.746608] FAT: Filesystem panic (dev sdj1)
[ 286.746614] invalid access to FAT (entry 0xbd277304)
[ 307.960116] kjournald starting. Commit interval 5 seconds
[ 307.960356] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
[ 307.964526] EXT3 FS on sda1, internal journal
[ 307.964534] EXT3-fs: mounted filesystem with ordered data mode.
[ 410.637579] kjournald starting. Commit interval 5 seconds
[ 410.637950] EXT3 FS on sdb1, internal journal
[ 410.637955] EXT3-fs: recovery complete.
[ 410.638366] EXT3-fs: mounted filesystem with ordered data mode.
[ 2111.481500] psmouse.c: bad data from KBC - timeout
[ 2399.242209] psmouse.c: bad data from KBC - timeout
[ 2400.712690] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 2863.762051] psmouse.c: bad data from KBC - timeout
[ 2881.992427] psmouse.c: bad data from KBC - timeout
[ 2882.238545] psmouse.c: bad data from KBC - timeout
[ 2882.815639] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3072.092954] psmouse.c: bad data from KBC - timeout
[ 3135.390517] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
[ 3135.898538] psmouse.c: resync failed, issuing reconnect request
[ 3136.794508] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input6
This was save as a file.
I cannot find anything to fix this and i copied the live cd kernel folder over mine. that did not work.
need help interpreting
Additional Info:
This all happened when i was tweaking with the kernel.i was looking to enhancing it. I dont know what all i did. one thing i recall doing was i typed
- Code: Select all
sudo make allyesconfig
I believe if I revert the kernel back to its default that i can fix my system.thus saving hours of time. I just cant find anything to do that from live cd. Live cd works and i am using it to type this.I do not want to reinstall. i am waiting for ultimate edition 2.0 to install on my 320gb hdd.
I have included the one of the .config and my xorg.conf file as well as hardware info to get an understanding of my system.
Comment:
Please help me with my .config file and my issue. I am not sure what to do.
I hope this is all the info required. i cannot open the preload.log file.